Battleground Games Forum

Battleground Games & Hobbies => Painting & Modeling => Topic started by: Loranus on March 26, 2012, 07:54:01 PM

Title: Green Stuff
Post by: Loranus on March 26, 2012, 07:54:01 PM
I'm planning out a Conversion Model project and I am going to be doing some Green Stuff Sculpting for the model. I wanted to know if there are different modeling epoxies and which one people have had the best work with.

And some other questions concerning Green Stuff. When your mixing the Blue and Yellow does the amount stay proportionate like if you used 1 unit of yellow and 1 unit of blue would you get 2 unit of green stuff to work with?

Thanks for any info you guys have.
Title: Re: Green Stuff
Post by: Benjamin on March 26, 2012, 07:55:38 PM
If I need the Green Stuff to set harder, I mix in a higher ratio of blue.
Title: Re: Green Stuff
Post by: Loranus on March 26, 2012, 08:01:19 PM
I meant like mass wise could have worded it better. If I put a Gram of Yellow and a Gram of Blue do I get 2 Grams of Green to work with.
Title: Re: Green Stuff
Post by: Benjamin on March 26, 2012, 08:17:23 PM
Pretty sure. Like, I'm no physicist, but that seems right.
Title: Re: Green Stuff
Post by: Seth on March 26, 2012, 08:23:43 PM
pretty sure 1+1=2
But Ben is right if when modeling you want to be able to work it with the green stuff longer then mix in more yellow if you want it to stiffen faster and be harder then more blue. It also depends on what you are trying to make with it.
Title: Re: Green Stuff
Post by: JakeM on March 27, 2012, 09:35:18 PM
If your sculpting tools are sticking to the green stuff then dip them in water.